• Casio G Shock G 9000
• Casio G Shock Ga 100 Manual
• Casio G Shock Ga 110 Manual
• Casio G Shock Setting Instructions
• Casio G Shock G 100

Casio designed it's G-Shock watches to be virtually indestructible rugged timepieces that can last a lifetime. G-Shock watches bearing the module 2688 marking on the back also include Casio's Waveceptor technology. Waveceptor watches are capable of synchronizing to the proper time using a signal transmitted from Fort Collins, Colorado. G-Shock Watches by Casio - the ultimate tough watch. Water resistant watch, shock resistant watch - built with uncompromising passion. Casio G-SHOCK support service. ALL RIGHTS RESERVED. 2006-2019 CASIO AMERICA INC.

Module No. 2248/2276/2278

2248/2276/2278-1

GENERAL GUIDE

•

Press

C

to change from mode to mode.

•

Pressing

L

in any mode illuminates the display for about 3 seconds.

•

If you do not perform any operation for a few minutes while a setting screen (with flashing digits) is on the display, the watch automatically exits the setting screen.

•

If you do not perform any operation for a few minutes in the Data Bank Mode or Day Counter Mode, the watch automatically reverts to the normal timekeeping screen.

The operational procedures for Modules 2248, 2276 and 2278 are identical. All of the illustrations in this manual show Module 2248.

Timekeeping Mode

Data Bank Mode

Press

C

.

Day Counter Mode

Alarm Mode

Stopwatch Mode

Dual Time Mode

[Module 2248]

[Module 2278]

[Module 2276]

TIMEKEEPING MODE

•

Press

D

to toggle between 12-hour and 24-hour

timekeeping.

•

With 12-hour timekeeping, times between noon and
midnight are indicated by P (pm), while no indicator
appears for times between midnight and noon.

•

No indicators do not appears for any time while 24-hour
timekeeping is selected.

To set the time and date

1. While in the Timekeeping Mode, hold down

A

until the

seconds digits flash on the display, indicating the
setting screen.

2. Press

C

to move the flashing in the sequence shown below.

DST

Seconds

Day

Hour

Year

Month

Minutes

3. While the seconds setting is selected (flashing), press

D

to reset it to 00. If you

press

D

while the seconds setting is in the range of 30 to 59, the seconds are

reset to 00 and 1 is added to the minutes. If the seconds setting is in the range of
00 to 29, the minutes count is unchanged.

•

Nissan tiida 2008 user manual pdf. While the DST

∗

setting is selected (DST on indicator is flashing), press

D

to

toggle it on (on) and off (OF). If DST setting is on, the DST on indicator is shown
in the Timekeeping Mode, Day Counter Mode and Alarm Mode.

4. While any other setting is selected (flashing), press

D

to increase it or

B

to

decrease it. Holding down either button changes the setting at high speed.

5. After you make the settings you want, press

A

to exit the setting screen.

•

The day of the week is automatically set in accordance with the date.

•

The date can be set within the range of January 1, 2000 to December 31, 2039.

•

The watch’s built-in full automatic calendar automatically makes allowances for
different month lengths and leap years. Once you set the date, there should be no
reason to change it except after the replacement of the watch’s battery.

∗

Daylight Saving Time (DST), which is also sometimes called “summer time”
advances the time for one hour, as is the custom in some areas during the
summer. Remember that not all countries or even local areas use Daylight Saving
Time.

ABOUT THE BACKLIGHT

Press

L

to illuminate the display for about 3 seconds.

•

The backlight of this watch employs an electro-luminescent (EL) light, which loses
its illuminating power after very long term use.

•

Frequent use of the backlight shortens the battery life.

•

The watch emits an audible sound whenever the display is illuminated. This does
not indicate malfunction of the watch.

•

The illumination provided by the backlight may be hard to see when viewed under
direct sunlight.

•

The backlight automatically turns off whenever an alarm sounds.

Seconds

Day of
week

PM
indicator

Hour

Minutes

Month - Day

DST on indicator

Year

DATA BANK MODE

The Data Bank Mode lets you store up to 25 records,
each with a name (up to eight characters) and a phone
number (up to 12 digits). Data is automatically stored into
alphabetical order based on the name data. You can
recall records by scrolling through them on the display.

•

The record on the display when you exit the Data Bank
Mode appears first the next time you enter the Data
Bank Mode.

To input a new Data Bank record

1. In the Data Bank Mode, use

D

or

B

until the new data

screen appears.

•

If the new data screen does not appear when you
press

D

and

B

, it means that memory is full. To

store another record, you will first have to delete a
record stored in memory.

2. Hold down

A

and a cursor appears on the text area.

3. Use

D

or

B

to scroll through characters at the current cursor position. Characters

scroll in the sequence shown below.

A to Z

0 to 9

(Space)

Press .

Press .

•

Holding down either button scrolls at high speed.

4. When the character you want is at the current cursor position, press

C

to move the

cursor to the right.

5. Repeat the steps 3 and 4 to input the rest of the characters.

•

You can input up to eight characters for the name, though only three characters
are visible at a time. If the name you input has fewer than eight characters, use

C

to move the cursor to the eighth space (which means you would press

C

three times after inputting a five-character name).

•

Holding down

C

to move the cursor at high speed.

6. After you input the name, use

C

to move the cursor to the number area.

•

Pressing

C

while the cursor is located at the eighth character of the text area

advances to the number area. Pressing

C

while the cursor is located at the 12th

digit of the number area returns to the text area.

7. Use

D

or

B

to scroll through characters (hyphen, numbers, space) at the current

cursor position on the number area. Characters scroll in the sequence shown
below.

0 to 9

(Space)

Press .

Press .

•

Holding down either button scrolls characters at high speed.

•

You can input up to 12 digits for the number.

8. After inputting the name and number of the record, press

A

to store it and exit the

setting screen.

•

The display can show only three name characters at a time. Longer names scrolls
continuously from right to left. The symbol “ ” indicates that the character to the
left is the last, and the character to the right is the first.

To recall Data Bank data

In the Data Bank Mode, press

D

to scroll forward through the stored data items or

B

to scroll in reverse.

•

Holding down either button scrolls at high speed.

To edit Data Bank data items

1. In the Data Bank Mode, use

D

or

B

to display the data you want to edit.

2. Hold down

A

until the cursor appears in the display.

3. Use

C

to move the cursor to the character you want to change.

•

Holding down

C

to move the cursor at high speed.

4. Use

Asus 1005hab manual download. D

or

B

to change the character.

Casio G Shock G 9000

•

Holding down either button scrolls characters at high speed.

•

See step 3 of “To input a new Data Bank record” for information on inputting
name characters, and step 7 for inputting number characters.

5. After making the changes that you want, press

A

to store them and exit the setting

screen.

To delete a Data Bank record

1. In the Data Bank Mode, use

D

or

Casio G Shock Ga 100 Manual

B

to display the record you want to delete.

2. Hold down

A

until the cursor appears in the display.

3. Press

D

and

B

at the same time. The message “CLR” appears in the display,

indicating that the record was deleted.

•

After the record is deleted, the cursor appears in the text area, ready for input.

4. Input a new record or press

A

to exit the setting screen.

Mode indicator

Text area

Remaining memory

Number area

[ New Data Screen ]

Casio G Shock Ga 110 Manual

Casio G Shock Setting Instructions

Casio G Shock G 100

• Super Illuminator
  At the touch of a button, the display can be brightly illuminated in a fashionable color
• Shock-resistant
  Shock-resistant construction protects against impact and vibration.
• Second time zone
  A second location time can be set and called up. Ideal if you frequently make overseas calls.
• Stopwatch function - 1/100 sec. - 24 hours
  Elapsed time, split time and final time are measured with 1/100-sec accuracy. The watch can measure times of up to 24 hours.
• Lap memory 120
  Measured total, lap and split times can be stored in a memory with the date and can be displayed again later. A data set consists of: date, total, lap and split times. The memory has enough space for up to 120 data sets.
• Timer - 1/1 sec. - 100 min.
  The countdown timer emits a signal after a preset period of time has elapsed. The watch has a maximum timing capacity of 100 minutes and can be set in second-long cycles.
• 5 daily alarms
  The daily alarm reminds you about recurring events with an acoustic signal at the time you have set. This model has 5 independent alarms for flexible reminders of important appointments.
• Button tones on/off
  The button tones for using the mode button can be turned off. This means that the watch no longer beeps when switching from one function to another. Preset alarm or countdown timers remain active when the button tones are deactivated.
• Hand Moving Function
  With a push of a button, hands are moving and permit a free visibility of functions like stopwatch or date.
• Automatic calendar with Date, Day and Month
  Once set, the automatic calendar always displays the correct date.
• 12/24-hour timekeeping
  Times can be displayed in either a 12-hour or 24-hour format.
• Mineral glass
  The tough mineral glass resists scratching.
• Resin case
  
• Resin band
  Synthetic resin is the ideal material for wrist straps thanks to its extremely durable and flexible properties.
• Buckle
  
• 3 Years - 1 Battery
  The battery supplies the watch with sufficient energy for approx. three years.
• Water resistance classification (20 bar)
  Perfect for free diving without scuba gear: the watch is water resistant up to 20 bar according to ISO 22810.
• Dimensions (H x W x D)
  54,1mm x 48,6mm x 15,5mm
• Weight
  approx. 63,0 g

Availability of models and/or lineups may differ depending on the country or region.
Technical amendments and errors excepted. The sizes in figures do not correspond to the original sizes.
The colours may differ slightly from the original.